Lighting Information - Home Page

Line Voltage Pendant Fixtures

Q.Are the Pendant fixtures UL listed?

• Yes, they are UL & CUL listed, you can find listed products at www.ul.com.

Q. What are the different ways I can order the pendant fixtures?

• First determine the hanging method. You have 2 options:
  
  a. As part of a track system, you will simply determine the track system:
  
  i. 3-wire track (PLO-HTK fixture for "H" tracks)
  ii. 2-wire track (PLO-L TK fixture for "L" tracks)
  iii. Wide 2-wire track (PLO-JTK fixture for "J" tracks)
  iv. 2-circuit track (PLO-JTK fixture for "J2" tracks-requires use of J-CLlP)
  
  b. As a single monopoint light. PLO-MO - On a 4 %" monopoint.

Q.Can I get pendants longer than 8'?

• They only come in one length- 96" from the factory. However, we can supply longer lengths of the same wire. You would still need to order the cord sets, discard the supplied wire, and order part # SVT-XX-BK or WT (where XX is desired length) and reattach ends.

Q.Can the pendant fixtures be field shortened? If so, which end of the cord do I shorten?

• Cord length adjustment is easily accomplished on track models by unscrewing the bottom portion of the holder, and cutting the socket wire to the desired length from the socket side, or at either end on the monopoints.

Q. How can you mount a pendant light on a sloped ceiling?

• The canopy or track fixture is installed as usual on the sloped ceiling. The cord makes the bend.

Q. Do you offer a "Hang-Straight" tube for the line voltage pendants as well?

• The tube accessory is not necessary for the line voltage pendants as the weight of the shades should be enough to pull the cord straight. The heavier cord will not fit through the tube.

Q.What is included in the socket set?

• The socket set includes the socket, a 96" 3 conductor cord, and a holding ring to secure the shade to the socket holder.

Lighting Information - Home Page